PLOrk speaker building notes

From CSWiki
Revision as of 00:25, 13 April 2008 by Narveson (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

A place for useful notes on building the new silver hemispheres, sorted by step:

Preparing the rings and drivers

  • The sticky stuff on the foam rings for the drivers isn't too good - a lot of them fell off over night. Maybe save this step until the drivers are ready to be screwed on to a hemi.

Installing The Drivers

  • Don't forget to put the ring over the wire before soldering the speaker to it. Forgetting to do this is lame. Current score: Dan: 2 or more, Jascha: 2.
  • Trim the excess tape from the screw-holes with something before putting the screws in - not doing this can sometimes gum the screws up and make it annoying and needlessly difficult to get them in.