Difference between revisions of "StereoChordEGG.ck"

From CSWiki
Jump to: navigation, search
Line 6: Line 6:
 
  // hear what this little guy sounded like -- as best as my 35 year old, admittedly alcohol
 
  // hear what this little guy sounded like -- as best as my 35 year old, admittedly alcohol
 
  // addled memories will permit.
 
  // addled memories will permit.
+
 
+
 
 
  class Chord  
 
  class Chord  
 
  {
 
  {
string myName;  // a name for us to show the user during debug prints.  BTW: what's with <<<>>> ??!?!
+
    string myName;  // a name for us to show the user during debug prints.  BTW: what's with <<<>>> ??!?!
+
 
+
 
//Paia's circuit used a top-octave generator to make a square wave train that they somehow filtered.
+
    //Paia's circuit used a top-octave generator to make a square wave train that they somehow filtered.
// I can't remember how that happened so I used banded wave guides, since it sounded right.
+
    // I can't remember how that happened so I used banded wave guides, since it sounded right.
+
 
// Paia used three note chords, so that's good enough for us.
+
    // Paia used three note chords, so that's good enough for us.
BandedWG tonic => gain g;
+
    BandedWG tonic => gain g;
BandedWG two => g;
+
    BandedWG two => g;
BandedWG third => g;
+
    BandedWG third => g;
+
 
// the banded wave guides will be playing all the time, so the only control is that
+
    // the banded wave guides will be playing all the time, so the only control is that
// we will be ramping the gain of the mixer from current vol to wanted vol.
+
    // we will be ramping the gain of the mixer from current vol to wanted vol.
float currvol;
+
    float currvol;
float wantedvol;
+
    float wantedvol;
g => dac;
+
    g => dac;
+
 
// set some defaults for the banded wave guide generators.  I don't know or care too much
+
    // set some defaults for the banded wave guide generators.  I don't know or care too much
//  what these all mean.  It is enough that someone out in internet land knows.
+
    //  what these all mean.  It is enough that someone out in internet land knows.
//  "The internet is the ultimate irreferance":  Jim Hinds. and you can quote me on that.
+
    //  "The internet is the ultimate irreferance":  Jim Hinds. and you can quote me on that.
public void  setBand ( BandedWG b, float loudness, int note ) {
+
    public void  setBand ( BandedWG b, float loudness, int note ) {
    loudness=> b.gain;
+
        loudness=> b.gain;
    1=> b.preset;
+
        1=> b.preset;
+
 
// comp-XXX salesman: "hey Arnie!  He doesn't know what std.mtof does!". Spock: "read the source, luke".
+
        // comp-XXX salesman: "hey Arnie!  He doesn't know what std.mtof does!". Spock: "read the source, luke".
    std.mtof(21+note) => b.freq;
+
        std.mtof(21+note) => b.freq;
+
 
// we love rand functions to set important parameters so that the wool is firmly over our eyes.
+
        // we love rand functions to set important parameters so that the wool is firmly over our eyes.
//  As the Church of the Subgenius sez: "Praise Bob!"
+
        //  As the Church of the Subgenius sez: "Praise Bob!"
    std.rand2f( 0.1, 0.9 ) => b.bowRate;
+
        std.rand2f( 0.1, 0.9 ) => b.bowRate;
    std.rand2f( 0.2, 0.35 ) => b.bowPressure;
+
        std.rand2f( 0.2, 0.35 ) => b.bowPressure;
    std.rand2f( 0.6, 0.8 ) => b.startBowing;
+
        std.rand2f( 0.6, 0.8 ) => b.startBowing;
}
+
    }
+
 
+
 
// adjust the gain up or down as needed without going passed the desired limit
+
    // adjust the gain up or down as needed without going passed the desired limit
// note that the direction of the adjustment MUST be in agreement with the desired
+
    // note that the direction of the adjustment MUST be in agreement with the desired
// direction.  This method doesnt know about that.  That's one reason it is private.
+
    // direction.  This method doesnt know about that.  That's one reason it is private.
private void gainTo ( float v, float wanted ) {
+
    private void gainTo ( float v, float wanted ) {
    currvol + v => float adjust;
+
        currvol + v => float adjust;
    if ( wanted > currvol && adjust > wanted ) wanted => adjust;
+
        if ( wanted > currvol && adjust > wanted ) wanted => adjust;
    if ( wanted < currvol && adjust < wanted ) wanted => adjust;
+
        if ( wanted < currvol && adjust < wanted ) wanted => adjust;
    adjust=>currvol;
+
        adjust=>currvol;
    adjust=>g.gain;
+
        adjust=>g.gain;
}
+
    }
+
 
// set some reasonable values for this object.  Normally we would do this in a constructor. (where
+
    // set some reasonable values for this object.  Normally we would do this in a constructor. (where
// are the constructors?  I must have missed something...
+
    // are the constructors?  I must have missed something...
//
+
    //
public void  setChord ( int tonicValue, int twoValue, int thirdValue,string n) {
+
    public void  setChord ( int tonicValue, int twoValue, int thirdValue,string n) {
    n => myName;
+
        n => myName;
    setBand (tonic, .80, tonicValue);
+
        setBand (tonic, .80, tonicValue);
    setBand (two, .85, twoValue);
+
        setBand (two, .85, twoValue);
    setBand (third, .9, thirdValue);
+
        setBand (third, .9, thirdValue);
    0 => wantedvol;
+
        0 => wantedvol;
    0 => currvol;
+
        0 => currvol;
    0=> g.gain;
+
        0=> g.gain;
 
     }
 
     }
+
 
//ramp the volume on this object incrementally till we hit the wanted volume
+
    //ramp the volume on this object incrementally till we hit the wanted volume
public void rampgain ( ) {
+
    public void rampgain ( ) {
    float adjust;
+
        float adjust;
    while ( 1 ) {
+
        while ( 1 ) {
        175::ms => now;
+
            175::ms => now;
        if ( currvol > wantedvol ) {
+
            if ( currvol > wantedvol ) {
            gainTo(-.2, wantedvol);
+
                gainTo(-.2, wantedvol);
        }
+
            }
        if ( currvol < wantedvol ) {
+
            if ( currvol < wantedvol ) {
            gainTo(.1, wantedvol);
+
                gainTo(.1, wantedvol);
        }
+
            }
    // <<<myName, currvol,wantedvol>>>;
+
            // <<<myName, currvol,wantedvol>>>;
 
         }
 
         }
 
     }
 
     }
+
 
 
  }
 
  }
+
 
 
  //  a function for "syntactic cod-liver-oil" since we can't spork c.rampgain directly
 
  //  a function for "syntactic cod-liver-oil" since we can't spork c.rampgain directly
 
  fun void runChord (Chord c) {
 
  fun void runChord (Chord c) {
c.rampgain();
+
    c.rampgain();
 
  }
 
  }
+
 
 
  //set up the I, IV and V chords and start them sounding at amplitude zero
 
  //set up the I, IV and V chords and start them sounding at amplitude zero
 
  Chord I;
 
  Chord I;
Line 101: Line 101:
 
  V.setChord ( 5,7,2,"V");
 
  V.setChord ( 5,7,2,"V");
 
  spork ~ runChord(V);
 
  spork ~ runChord(V);
+
 
 
  //since machines like to use numbers to access the chords, rather than names like I,IV,V
 
  //since machines like to use numbers to access the chords, rather than names like I,IV,V
 
  //we put the chord object (references) into an array
 
  //we put the chord object (references) into an array
 
  [I,IV,V] @=> Chord @ s[ ] ;
 
  [I,IV,V] @=> Chord @ s[ ] ;
+
 
 
  //changeto will bring up the volume on one of the chords and leave it like for a specified duration
 
  //changeto will bring up the volume on one of the chords and leave it like for a specified duration
 
  fun void changeto (float amplitude,int index,dur t )
 
  fun void changeto (float amplitude,int index,dur t )
 
  {
 
  {
for ( 0 =>int i; i <3 ; i++ ) {
+
    for ( 0 =>int i; i <3 ; i++ ) {
    0 => float v;
+
        0 => float v;
    if (i == index ) amplitude => v;
+
        if (i == index ) amplitude => v;
    v=> s [i].wantedvol;
+
        v=> s [i].wantedvol;
}
+
    }
t => now ;
+
    t => now ;
 
  }
 
  }
+
 
 
  //select a chord at random, bring it up to a random level and hold for some reasonable time
 
  //select a chord at random, bring it up to a random level and hold for some reasonable time
 
  while (1) {
 
  while (1) {
changeto (std.rand2f(.5,.9),  std.rand2(0,2), std.rand2f(1.5,4)::second );
+
    changeto (std.rand2f(.5,.9),  std.rand2(0,2), std.rand2f(1.5,4)::second );
 
  }
 
  }

Revision as of 18:08, 21 February 2006

// In the late '60s or early 70's Paia electronics came out with a circuit kit called the
// Stereo Chord EGG (Electronic Gratification Generator).  It was a top-octave generator
// along with a resistor network to mix up the I,IV and V chords into the left and right channels.
// 
//  This little chuck proggy is an attempt to re-create "the wisdom of the ancients"  and let you
// hear what this little guy sounded like -- as best as my 35 year old, admittedly alcohol
// addled memories will permit.


class Chord 
{
    string myName;  // a name for us to show the user during debug prints.  BTW: what's with <<<>>> ??!?!


    //Paia's circuit used a top-octave generator to make a square wave train that they somehow filtered.
    // I can't remember how that happened so I used banded wave guides, since it sounded right.
    // Paia used three note chords, so that's good enough for us.
    BandedWG tonic => gain g;
    BandedWG two => g;
    BandedWG third => g;
    // the banded wave guides will be playing all the time, so the only control is that
    // we will be ramping the gain of the mixer from current vol to wanted vol.
    float currvol;
    float wantedvol;
    g => dac;
    // set some defaults for the banded wave guide generators.  I don't know or care too much
    //  what these all mean.  It is enough that someone out in internet land knows.
    //  "The internet is the ultimate irreferance":  Jim Hinds. and you can quote me on that.
    public void  setBand ( BandedWG b, float loudness, int note ) {
        loudness=> b.gain;
        1=> b.preset;
        // comp-XXX salesman: "hey Arnie!  He doesn't know what std.mtof does!". Spock: "read the source, luke".
        std.mtof(21+note) => b.freq;
        // we love rand functions to set important parameters so that the wool is firmly over our eyes.
        //  As the Church of the Subgenius sez: "Praise Bob!"
        std.rand2f( 0.1, 0.9 ) => b.bowRate;
        std.rand2f( 0.2, 0.35 ) => b.bowPressure;
        std.rand2f( 0.6, 0.8 ) => b.startBowing;
    }


    // adjust the gain up or down as needed without going passed the desired limit
    // note that the direction of the adjustment MUST be in agreement with the desired
    // direction.  This method doesnt know about that.  That's one reason it is private.
    private void gainTo ( float v, float wanted ) {
        currvol + v => float adjust;
        if ( wanted > currvol && adjust > wanted ) wanted => adjust;
        if ( wanted < currvol && adjust < wanted ) wanted => adjust;
        adjust=>currvol;
        adjust=>g.gain;
    }
    // set some reasonable values for this object.  Normally we would do this in a constructor. (where
    // are the constructors?  I must have missed something...
    //
    public void  setChord ( int tonicValue, int twoValue, int thirdValue,string n) {
        n => myName;
        setBand (tonic, .80, tonicValue);
        setBand (two, .85, twoValue);
        setBand (third, .9, thirdValue);
        0 => wantedvol;
        0 => currvol;
        0=> g.gain;
    }
    //ramp the volume on this object incrementally till we hit the wanted volume
    public void rampgain ( ) {
        float adjust;
        while ( 1 ) {
            175::ms => now;
            if ( currvol > wantedvol ) {
                gainTo(-.2, wantedvol);
            }
            if ( currvol < wantedvol ) {
                gainTo(.1, wantedvol);
            }
            //	<<<myName, currvol,wantedvol>>>;
        }
    }
}
//  a function for "syntactic cod-liver-oil" since we can't spork c.rampgain directly
fun void runChord (Chord c) {
    c.rampgain();
}
//set up the I, IV and V chords and start them sounding at amplitude zero
Chord I;
I.setChord ( 1,3,5,"I");
spork ~ runChord(I);
Chord IV;
IV.setChord ( 4,6,1,"IV");
spork ~ runChord(IV);
Chord V;
V.setChord ( 5,7,2,"V");
spork ~ runChord(V);
//since machines like to use numbers to access the chords, rather than names like I,IV,V
//we put the chord object (references) into an array
[I,IV,V] @=> Chord @ s[ ] ;
//changeto will bring up the volume on one of the chords and leave it like for a specified duration
fun void changeto (float amplitude,int index,dur t )
{
    for ( 0 =>int i; i <3 ; i++ ) {
        0 => float v;
        if (i == index ) amplitude => v;
        v=> s [i].wantedvol;
    }
    t => now ;
}
//select a chord at random, bring it up to a random level and hold for some reasonable time
while (1) {
    changeto (std.rand2f(.5,.9),  std.rand2(0,2), std.rand2f(1.5,4)::second );
}