Difference between revisions of "PLOrk fall2007"

From CSWiki
Jump to: navigation, search
Line 12: Line 12:
  
 
== Hardware Resources ==
 
== Hardware Resources ==
 +
=== books and other readings ===
 
* get [http://www.amazon.com/exec/obidos/tg/detail/-/0415975921/qid=1126047145/sr=1-1/ref=sr_1_1/102-2421436-3816140?v=glance&s=books Nic Collins' book] on hardware hacking
 
* get [http://www.amazon.com/exec/obidos/tg/detail/-/0415975921/qid=1126047145/sr=1-1/ref=sr_1_1/102-2421436-3816140?v=glance&s=books Nic Collins' book] on hardware hacking
 
* [http://www.amazon.com/Circuit-Bending-Build-Alien-Instruments-ExtremeTech/dp/0764588877 Reed Ghazala's book] on circuit-bending is also a blast
 
* [http://www.amazon.com/Circuit-Bending-Build-Alien-Instruments-ExtremeTech/dp/0764588877 Reed Ghazala's book] on circuit-bending is also a blast
 
* [http://www.amazon.com/Musical-Instrument-Design-Practical-Information/dp/1884365086/ref=pd_bbs_sr_1/105-5017104-3551669?ie=UTF8&s=books&qid=1187549841&sr=1-1 Bart Hopkins' book] on instrument building has lots of great info about building musical things out of metal, wood, glass, and so on...
 
* [http://www.amazon.com/Musical-Instrument-Design-Practical-Information/dp/1884365086/ref=pd_bbs_sr_1/105-5017104-3551669?ie=UTF8&s=books&qid=1187549841&sr=1-1 Bart Hopkins' book] on instrument building has lots of great info about building musical things out of metal, wood, glass, and so on...
 +
* check out the [http://portal.acm.org/toc.cfm?id=SERIES11275&type=series&coll=Portal&dl=GUIDE&CFID=26502586&CFTOKEN=20454133 proceedings from past NIME conferences (New Interfaces for Musical Expression)] for ideas and general wackiness
 +
* * [[PLOrk Reader]] again
 +
=== campus stuff ===
 +
* if you haven't visited Perry's [http://soundlab.cs.princeton.edu/ soundlab] do so!
 
* there is a machine shop class offered in the Engineering Quad; useful primarily for metal-working, though wood and plastic is also possible. contact Larry McIntyre about taking this 5-week course to get access to the machine shop
 
* there is a machine shop class offered in the Engineering Quad; useful primarily for metal-working, though wood and plastic is also possible. contact Larry McIntyre about taking this 5-week course to get access to the machine shop
 
+
=== arduino stuff ===
 
 
 
* [http://www.arduino.cc/ Arduino] microncontroller resources
 
* [http://www.arduino.cc/ Arduino] microncontroller resources
 
** [http://www.arduino.cc/en/Tutorial/HomePage tutorials]
 
** [http://www.arduino.cc/en/Tutorial/HomePage tutorials]
Line 23: Line 27:
 
** [http://www.atomicsalad.com/archive/2007/03/11/tutorial_sparkfun_protoshield_assembly_use.php assembly tutorial for the ProtoShield]; a useful way to get comfortable with some basic electronics assembly and end up with something useful.
 
** [http://www.atomicsalad.com/archive/2007/03/11/tutorial_sparkfun_protoshield_assembly_use.php assembly tutorial for the ProtoShield]; a useful way to get comfortable with some basic electronics assembly and end up with something useful.
 
** [http://todbot.com/blog/2006/07/11/arduino-breadboard-shield/ another super easy protoshield]; $10 at Radio Shack
 
** [http://todbot.com/blog/2006/07/11/arduino-breadboard-shield/ another super easy protoshield]; $10 at Radio Shack
 
 
* check out the [http://portal.acm.org/toc.cfm?id=SERIES11275&type=series&coll=Portal&dl=GUIDE&CFID=26502586&CFTOKEN=20454133 proceedings from past NIME conferences (New Interfaces for Musical Expression)] for ideas and general wackiness
 
  
  
  
 
== Software  Resources ==
 
== Software  Resources ==

Revision as of 14:07, 19 August 2007

General Information

  • homepage
  • PLOrk Reader
  • primary meeting time: Th 1:30-4:20, McAlpin and/or Studio B
    • assistance setting up may be requested on many of these meetings


Important Dates

  • November 7 (tentative) and 8 (definite); performances in DC area.
    • Not everyone will be involved, and this is a PLOrk-specific performance.


Hardware Resources

books and other readings

campus stuff

  • if you haven't visited Perry's soundlab do so!
  • there is a machine shop class offered in the Engineering Quad; useful primarily for metal-working, though wood and plastic is also possible. contact Larry McIntyre about taking this 5-week course to get access to the machine shop

arduino stuff


Software Resources